FIBER GLASS-EVERCOAT CO. -- AUTOBODY FILLER -- 8010-00-926-2133
===================== Product Identification ===================== Product ID:AUTOBODY FILLER MSDS Date:01/01/1985 FSC:8010 NIIN:00-926-2133 Kit Part:Y === Responsible Party === Company Name:FIBER GLASS-EVERCOAT CO. Address:6600 CORNELL ROAD City:CINCINNATI State:OH ZIP:45242-2033 Country:US Info Phone Num:513-489-7600 Emergency Phone Num:800-543-4530 CAGE:LO327 === Contractor Identification === Company Name:FIBER GLASS-EVERCOAT CO,INC CAGE:LO327 Company Name:FIBRE GLASS-EVERCOAT CO INC Address:6600 CORNELL ROAD Box:City:CINCINNATI State:OH ZIP:45242 Country:US Phone:513-489-7600 CAGE:18731 ============= Composition/Information on Ingredients ============= Ingred Name:BENZOYL PEROXIDE (45%) CAS:94-36-0 RTECS #:DM8575000 Fraction by Wt: 2.0% ACGIH TLV:5 MG/CUM Ingred Name:STYRENE, MONOMER (SARA III) CAS:100-42-5 RTECS #:WL3675000 Fraction by Wt: 13.0% OSHA PEL:100 PPM ACGIH TLV:S,50PPM/100STEL;9293 EPA Rpt Qty:1000 LBS DOT Rpt Qty:1000 LBS Ingred Name:TALC RTECS #:VV7720000 Fraction by Wt: 58.0% ACGIH TLV:20 MPPCF Ingred Name:POLYESTER RESIN Fraction by Wt: 27% ===================== Hazards Identification ===================== Effects of Overexposure:OBJECTIONABLE ODOR;EYE AND NASAL IRRITATION.LOW-DIZZ&DRUNKENESS.HIGH LEVEL-ANESTHESIA ======================= First Aid Measures ======================= First Aid:EYE&SKIN-FLUSH PROMPTLY W/PLENTY OF H*2O,GET MED ATT.INH.-PROMPTLY REMOVE TO FRESH AIR,GET MED ATT. INGESTION-NO KNOWN ANTIDOTE:TREAT SYMPTOMATICALLY,GET MEDICAL ATTENTION.SKIN-REMOVE CONTAMINATED CLO THING.WASH W/SOAP & WATER. ===================== Fire Fighting Measures ===================== Flash Point:98 F CC Extinguishing Media:WATER FOG,FOAM,CO*2,DRY CHEMICAL Unusual Fire/Explosion Hazard:AT ELEVATED TEMP,SUCH AS FIRE CONDITIONS,POLYMERIZATION MAY TAKE PLACE.CONTAINED POSS.VIOLENT RUPTUR ================== Accidental Release Measures ================== Spill Release Procedures:COVER SPILL W/ABSORBENT AGENT. SCRAPE UP,CLEAN SPILL AREA W/SOLVENT ====================== Handling and Storage ====================== Handling and Storage Precautions:CONTROL TEMPERATURE IN STORAGE BELOW 80F. DO NOT USE NEAR FIRE OR FLAMES. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH/MSHA APPRVD RESP PROT FOR PARTICULAR EXPOSURE OF CONCERN Ventilation:MECHANICAL(GENERAL)-DOWN DRAFT MECH EXHST. NO LOCAL NEEDED Protective Gloves:NEOPRENE,NONSOL Eye Protection:CHEM WORKERS GOGGLES Supplemental Safety and Health VAPOR IS 1.1 TIMES HEAVIER,THAN AIR.AT 100 F AND HAS ANS IGNITION TEMPERATURE OF 914F CONFORMS TO SPEC TT-F-322D, AMEND ================== Physical/Chemical Properties ================== HCC:F4 Boiling Pt:B.P. Text:293 F Vapor Pres:4.5 Vapor Density:3.6 Spec Gravity:1.74 Solubility in Water:NEGLIGIBLE Appearance and Odor:GRAY PASTE, AROMATIC ODOR Percent Volatiles by Volume:12.0 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES ORGANIC PEROXIDES Stability Condition to Avoid:DO NOT STORE AT TEMPERATURES ABOVE 80F Hazardous Decomposition Products:CO & CO*2 Conditions to Avoid Polymerization:DO NOT STORE AT TEMPERATURES ABOVE 80F ==================== Disposal Considerations ==================== Waste Disposal Methods:INCINERATE IN PROPERLY DESIGNED FURNACE.COMPLY W/FEDERAL,STATE,&LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.